Pontiac Street Performance
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password

 All Forums
 Pontiac Performance
 Restoration & Performance Forum
 Tool Storage Cabinet on wheels
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Bill Boyle
Horse Feathers (Charter Member)

USA
4958 Posts

Posted - 02 Jan 2018 :  1:06:23 PM  Show Profile  Visit Bill Boyle's Homepage  Reply with Quote
Once again I'm looking at a rolling lower tool cabinet to house tools. I'd like it to have locking wheels and be about 18" or so in depth. I'm considering this one:

Homak BL04011410 41-Inch Professional Series 11-Drawer Rolling Cabinet, Blue

https://www.northerntool.com/shop/tools/product_200687983_200687983

Anyone familiar with Homak products?

Bill

"Dedicated to keeping the classic Pontiac engine alive."

----
400 bored +.030, forged TRW pistons, ported 62 heads, Hedman headers, 2.5 SS dual exhaust X Pypes, Comp 276AH10 cam, Scorpion 1.65 RR, 850 Q-jet, stock intake & tuned HEI; original owner.

cortcomp
Coyote

USA
5399 Posts

Posted - 02 Jan 2018 :  2:37:18 PM  Show Profile  Visit cortcomp's Homepage  Reply with Quote
That's a decent price. I shopped for a new box last year, and i'm appalled at the prices. $240 worth of steel and labor selling for 1k+. It's a box whose job is to prevent gravity from pulling all the tools in a pile on the floor. It's not electronic, hydraulic, precision machined, nothing. just bent and painted steel. I'm not even talking about snap on level boxes either, even harbor freight, and used boxes command a premium. If i had more tools, time and motivation, i would have just made one out of wood. After a lot of searching, comparing, and digging, i ended up with the one below and felt it was the best value for it's size. My father in law got one and likes it and a mechanic at one of my customer has one and likes it as well. The top section i have a power bar on for the laptop, phone charger, speakers, dremel/drill chargers, etc. You can shut it when painting or grinding/welding to keep the crap out of the electric devices.

https://www.homedepot.com/p/Husky-52-in-13-Drawer-Tool-Chest-and-Cabinet-Combo-in-Black-H52CH6TR7P/207105936

Go to Top of Page

rkellerjr
Many Feathers

USA
1294 Posts

Posted - 02 Jan 2018 :  4:50:59 PM  Show Profile  Reply with Quote
Here's one for your consideration. this is the one I bought and works great. Slightly bigger than the Homak your looking at...

46 in. 9-Drawer Mobile Workbench with Solid Wood Top, Black
https://www.homedepot.com/p/Husky-46-in-9-Drawer-Mobile-Workbench-with-Solid-Wood-Top-Black-7440946R/206839475?MERCH=REC-_-NavPLPHorizontal1_rr-_-NA-_-206839475-_-N

Rich
1975 TA - http://www.youtube.com/watch?v=aR86YT69yeY
Go to Top of Page

Bill Boyle
Horse Feathers (Charter Member)

USA
4958 Posts

Posted - 02 Jan 2018 :  6:11:15 PM  Show Profile  Visit Bill Boyle's Homepage  Reply with Quote
Rich--how thick is the wood top? Also, how is it fastened to the cabinet?

"Dedicated to keeping the classic Pontiac engine alive."

----
400 bored +.030, forged TRW pistons, ported 62 heads, Hedman headers, 2.5 SS dual exhaust X Pypes, Comp 276AH10 cam, Scorpion 1.65 RR, 850 Q-jet, stock intake & tuned HEI; original owner.

Edited by - Bill Boyle on 02 Jan 2018 6:11:34 PM
Go to Top of Page

Blued and Painted
Chief PONTIAC

USA
3481 Posts

Posted - 02 Jan 2018 :  7:51:00 PM  Show Profile  Reply with Quote
I would feel comfortable mounting a medium size vice on that husky.


Bull Nose Formula/ 461/ Q-Jet/
TH400/ 3.08 8.5 / R44TS.
Go to Top of Page

rkellerjr
Many Feathers

USA
1294 Posts

Posted - 02 Jan 2018 :  11:28:38 PM  Show Profile  Reply with Quote
Wood top is 3/4" solid wood and I have mounted a small/medium vice on it too. I'm not sure how the top is mounted, I'll have to take a look and get back with you but it isn't going anywhere. I'll also take a pic tomorrow. I am very pleased with it, have had it for several years now.

Scroll down in the link I provided, lots of details on it, drawer measurements, etc.

Rich
1975 TA - http://www.youtube.com/watch?v=aR86YT69yeY

Edited by - rkellerjr on 02 Jan 2018 11:31:13 PM
Go to Top of Page

Bill Boyle
Horse Feathers (Charter Member)

USA
4958 Posts

Posted - 03 Jan 2018 :  06:05:33 AM  Show Profile  Visit Bill Boyle's Homepage  Reply with Quote
Adding a vice to the cabinet would be ideal.

My garage was my dad's and he mostly did woodworking in there. Consequently, I inherited all of his woodworking tools and mechanics tools. Then off course I had my own of both.

When my TA is finished, I'd like to make alterations to the garage to gain a little more width so my TA and Corvette can live inside when not in use. I'm thinking that the long 8+ foot wood work bench my dad built that contains a heavy vice, fittings for a wood vice, and wire wheel and buffing machine needs to go, or be shortened and reduced in width. That would give me more wall space to mount racks and place other equipment along the wall. The area where cars need go needs to be clear, not cluttered with tools, equipment and stuff.

Where the metal storage unit we've been discussing would go, would be on the opposite side of the garage where I've already removed another 8' wooden workbench cabinet my dad built. At 24" wide it prevented doors on any car from being opened enough so one didn't have to become a contortionist to enter it. Having a slimmer and movable metal cabinet might be quite functional for me especially with a vice mounted on it.

I'll explore the Husky unit--I like the wood top feature a lot.

"Dedicated to keeping the classic Pontiac engine alive."

----
400 bored +.030, forged TRW pistons, ported 62 heads, Hedman headers, 2.5 SS dual exhaust X Pypes, Comp 276AH10 cam, Scorpion 1.65 RR, 850 Q-jet, stock intake & tuned HEI; original owner.
Go to Top of Page

rkellerjr
Many Feathers

USA
1294 Posts

Posted - 03 Jan 2018 :  06:26:26 AM  Show Profile  Reply with Quote
The top is attached by some big screws from underneath. The vice, I drilled the holes into the top and secured with bolts.






Rich
1975 TA - http://www.youtube.com/watch?v=aR86YT69yeY
Go to Top of Page

Bill Boyle
Horse Feathers (Charter Member)

USA
4958 Posts

Posted - 03 Jan 2018 :  08:43:50 AM  Show Profile  Visit Bill Boyle's Homepage  Reply with Quote
Rich, those are helpful photos. Thanks.

Bill

"Dedicated to keeping the classic Pontiac engine alive."

----
400 bored +.030, forged TRW pistons, ported 62 heads, Hedman headers, 2.5 SS dual exhaust X Pypes, Comp 276AH10 cam, Scorpion 1.65 RR, 850 Q-jet, stock intake & tuned HEI; original owner.
Go to Top of Page

Blued and Painted
Chief PONTIAC

USA
3481 Posts

Posted - 03 Jan 2018 :  11:27:35 AM  Show Profile  Reply with Quote
Don't think I wood knock out controll arm bushings but it will definitely hold many projects in place.

I recently tuned up the fit and function on my vice and finished it off with Pontiac Blue Metallic.

The tops normally just fit in the box frame work


Bull Nose Formula/ 461/ Q-Jet/
TH400/ 3.08 8.5 / R44TS.

Edited by - Blued and Painted on 03 Jan 2018 11:30:48 AM
Go to Top of Page

js292
Sitting Bull

USA
132 Posts

Posted - 05 Jan 2018 :  11:45:26 AM  Show Profile  Reply with Quote
I picked this one up at sears a few months back when I was looking, for the price I couldn't beat it.

http://www.sears.com/craftsman-53-in-wide-8-drawer-standard-duty/p-00931011000P?plpSellerId=Sears&prdNo=2&blockNo=2&blockType=G2



71 Formula 455
Go to Top of Page

Bill Boyle
Horse Feathers (Charter Member)

USA
4958 Posts

Posted - 05 Jan 2018 :  12:59:45 PM  Show Profile  Visit Bill Boyle's Homepage  Reply with Quote
John--that's a pretty nice unit too.

"Dedicated to keeping the classic Pontiac engine alive."

----
400 bored +.030, forged TRW pistons, ported 62 heads, Hedman headers, 2.5 SS dual exhaust X Pypes, Comp 276AH10 cam, Scorpion 1.65 RR, 850 Q-jet, stock intake & tuned HEI; original owner.
Go to Top of Page

Phil
The Great White Buffalo

USA
7250 Posts

Posted - 05 Jan 2018 :  3:45:22 PM  Show Profile  Reply with Quote
I used the one like in Rich's photos (from Home Cheapo), except I bought TWO and mounted one on top of the other. Works great and looks like a pro deal for a fraction of the cost.

Bowties are for Pee-wee Herman. "Chevy": even the name sounds cheap, but not as cheap as your Pontiac will be with an LS transplant.
Go to Top of Page

Miles
Sitting Bull

Canada
190 Posts

Posted - 10 Jan 2018 :  10:29:56 AM  Show Profile  Reply with Quote
Holy cow, prices have sure dropped since I bought mine. Proto 14 drawer 24"D X 45"W X 36#T with non-locking 6" casters. Has a locking jack on the end to keep it from moving and stable on uneven floors. $2000 in 1992. Had to switch from the typical mechanics lower roller-upper chest in order to get the box under low aircraft wings in the hanger.
Go to Top of Page

Blued and Painted
Chief PONTIAC

USA
3481 Posts

Posted - 10 Jan 2018 :  12:06:42 PM  Show Profile  Reply with Quote
The professional boxes like Mac, Snap on, Cornwell are of heavier gauge steel, extra reinforcement for weight on wheels, double roller drawer slides, spring loaded HD casters, powder coat finish.
The boxes in above posts are more than suitable for home and weekend warrior use.
If your working out of your tool box 8 hours a day, 310 days a year, for 30 years, then the Cadillac box is cost effective. JMO?


Bull Nose Formula/ 461/ Q-Jet/
TH400/ 3.08 8.5 / R44TS.

Edited by - Blued and Painted on 10 Jan 2018 12:26:12 PM
Go to Top of Page

Miles
Sitting Bull

Canada
190 Posts

Posted - 11 Jan 2018 :  09:09:55 AM  Show Profile  Reply with Quote
Well the tools were my living, and in 20 years it cost me $100 per year, who knows how much per hour. 25 years ago we didn't make much per hour so it was a major investment.
When I worked up north on float/skiplanes I made a wagon frame for my smaller box to sit on, then four wheel barrow tires and a steering axle so I could move the box down the docks or across the ice on the frozen lakes. A real pain getting a flat tire when it's 45*F below freezing.
Go to Top of Page

Bentwings
Two Feathers

USA
31 Posts

Posted - 11 Jan 2018 :  10:18:44 AM  Show Profile  Reply with Quote
Looking at these cool rollaround lowers got me thinking. I live in an appartment and they really don?t like it when I workmon my Streetrods in the inderground garage. I usually have to plan the operation carefully and take whatever tools I think I?ll need down to the garage in a hand box or store it in the garage space cabinets.

I thought maybe a roll around lower of modest size would work. I don?t have power available so batteries rule. The vice is cool. However I can see it getting in the way so if it were mounted with 3/8? blind nuts it could be removable and stored in say the bottom drawer.

I also build rc airplanes in my spare bed room so having a nice top is a plus. I usually use a door as a table as they are very straight and perfect size. Again some blind nuts and flat head screws could secure it it upstairs. I can level it easily as I usually do.

The whole thing needs to be very portable. Most of these have cheapo wheel sets so maybe I could add a better and larger wheel set. My old one didn?t roll easil6 on the carpet hallway.. soft wheels would be a plus on the spalled concrete in the garage. Black color would be less visible....I have to be a bit covert working on cars in the ?dungeon?

Any ideas?

Byron
Go to Top of Page

Bentwings
Two Feathers

USA
31 Posts

Posted - 11 Jan 2018 :  10:21:20 AM  Show Profile  Reply with Quote
Please excuse the goofy extra letters ans signs. My new iPad software does this as well as spellings. The text here is pretty small for my aging eyes. LOL
Go to Top of Page

rkellerjr
Many Feathers

USA
1294 Posts

Posted - 11 Jan 2018 :  10:45:07 AM  Show Profile  Reply with Quote
The casters on mine seem great and the unit rolls around with ease. The vice I put on is just held with nuts and bolts, I could remove it easily.

Rich
1975 TA - http://www.youtube.com/watch?v=aR86YT69yeY
Go to Top of Page

Bill Boyle
Horse Feathers (Charter Member)

USA
4958 Posts

Posted - 11 Jan 2018 :  12:05:43 PM  Show Profile  Visit Bill Boyle's Homepage  Reply with Quote
My mechanics tools always seem to be far away from my work. Years and years ago, portable tool boxes were used almost exclusively by me. Each box contained pliers, a ball peen hammer, wrenches, several screw drivers, sockets, ratchets and extensions. Today I have two metal boxes with drawers and they house "extras." I rely mostly on what is held in my small cabinet and tool chest. I also have two specialized wooden tool chests with drawers that contain specialized machine tools, gauges, mikes, drills and taps etc.

Byron, you might want to arm yourself with a Craftsman portable tool box that you hand carry to your work area. You can include those tools necessary for the job and change it as you go. (Something like this one: https://www.craftsman.com/products/craftsman-3-drawer-portable-tool-chest?taxon_id=2230 )


"Dedicated to keeping the classic Pontiac engine alive."

----
400 bored +.030, forged TRW pistons, ported 62 heads, Hedman headers, 2.5 SS dual exhaust X Pypes, Comp 276AH10 cam, Scorpion 1.65 RR, 850 Q-jet, stock intake & tuned HEI; original owner.

Edited by - Bill Boyle on 11 Jan 2018 1:25:45 PM
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Pontiac Street Performance © 2006-2017 Go To Top Of Page
This page was generated in 0.22 seconds. This Site Sponsored By:
Powered By: Snitz Forums 2000 Version 3.4.05