Pontiac Street Performance
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password

 All Forums
 Pontiac Performance
 Classified
 Complete Top end -Heads, 2 lifter set up, 2 intake
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ctpontiac
Buffalo

USA
60 Posts

Posted - 23 Oct 2016 :  11:27:52 AM  Show Profile  Reply with Quote
Complete upper end: Cam, Edelbrock Heads, 4150 & 4500 Victor Intakes, valve Springs, H/S roller rockers with brace, or T&D Shaft System, Head studs. I am stepping up to Tiger heads: This is a great set up for anyone want to move up in power. On my 461, 3100# car this setup ran 10.20 consistently. Would like to sell as a complete setup but will consider sell individually. $4500.00 plus shipping for everything.

Heads: Edelbrock Performer RPM - ported by Dave Wilcox (Dirty Bird) they flow 360 CFM plus. 78cc chambers with 2.25/1.80 valves ? 9 passes on head since valve job - Excellent heads. $2200.00 plus shipping

Intakes: Intakes are cut to and matched to the head providing a choice of 4150 or 4500 carb ? heads come with 1 water crossover. Intakes $220 ea, $40 water crossover. plus shipping

Harland Sharp 1.65 roller rockers with a Stud brace, comp roller lifter, push rods ? very good condition $450.00 plus shipping

T&D Shaft System: 1.65 rockers, push rods Complete use for 9 passes $950.00 plus shipping

Cam: Comp Cam; 4/7 swap; gross lift .631/,631; Duration @ .050 272/278; Lobe loft .4210/,4210 Lobe Separation 108 Grind# P8 47s 4026s/4030s R108 ? 9 Passes $400.00 plus shipping

Head Studs: ARP 190-4305 $150.00 plus shipping

Edited by - ctpontiac on 23 Oct 2016 11:28:51 AM
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Pontiac Street Performance © 2006-2017 Go To Top Of Page
This page was generated in 0.03 seconds. This Site Sponsored By:
Powered By: Snitz Forums 2000 Version 3.4.05