Pontiac Street Performance
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password

 All Forums
 Pontiac Performance
 Firebirds / Formulas/ TAs
 master cylinder bench bleed question
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ponchpowpow
Buffalo

42 Posts

Posted - 10 Sep 2016 :  10:40:46 AM  Show Profile  Reply with Quote
I converted my brakes to an aftermarket disk brake system. i know i have to bench bleed the master cylinder but do i also have to bench bleed the proportioning valve?

if so, can i just hook them together and bench bleed them at the same time?

thanks

cortcomp
Coyote

USA
5335 Posts

Posted - 10 Sep 2016 :  1:13:26 PM  Show Profile  Visit cortcomp's Homepage  Reply with Quote
If your prop valve is going to be right at the master like most aftermarket kits, yes, i'd do that. If it's down on the frame like the a bodies, i'd rather do it on the car than wrestle 6 ft of connected brake line.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Pontiac Street Performance © 2006-2017 Go To Top Of Page
This page was generated in 0.04 seconds. This Site Sponsored By:
Powered By: Snitz Forums 2000 Version 3.4.05